Inverter Communication Configuration
with my solar edge you can configure your inverter communication for example if your wi-fi network or password has been changed this option is supported by setup enabled inverters only if your inverter has an lcd screen use its control buttons instead
in order to configure your inverters communication tap inverter communication next scan the inverter qr code this code can be found on the qr code sticker located on one of the sides of the inverter if you are connecting to the inverter used last tap continue with last scan qr code instead of rescanning the same code if you cannot scan the qr code you can type the inverter connection details manually by typing the link at the bottom
Connecting to Your Wi-Fi Network
move the inverter red on off p-switch to p position and release within two seconds the status of your wi-fi connection is currently disconnected
in order to connect to your wi-fi network click configure select the desire wireless network type its password and tap join
you are now connected with your new desired wi-fi network to confirm that the connection was successful tap inverter communication
Confirming Connection and App Usage
move the inverter read on off p switch to p position and release within two seconds the connection was successful your inverter is now connected to the solar edge monitoring server via your home wi-fi network letting you monitor and control your system from anywhere at any time using the my solar edge app
for more information on how to use the my solar edge app go to the my solar edge playlist on the solaredge youtube channel thank you
Technical Specifications
| Feature | Detail |
|---|---|
| Inverter Communication Configuration | Supported for setup-enabled inverters |
| Inverter Communication Method (LCD) | Use control buttons (if LCD screen is present) |
| Inverter Communication Method (No LCD) | Tap "Inverter communication" in app, scan QR code |
| QR Code Location | On the QR code sticker on one of the inverter sides |
| Reconnecting to Last Inverter | Tap "continue with last scan qr code" |
| Manual Connection | Type inverter connection details manually |
| P-Switch Operation | Move red on/off p-switch to 'P' and release within 2 seconds |
| Wi-Fi Connection Status | Initial status may be "disconnected" |
| Connecting to Wi-Fi | Click "configure", select network, type password, tap "join" |
| Monitoring and Control | Via SolarEdge monitoring server and my solar edge app |
| App Functionality | Monitor and control system from anywhere, any time |
| App Resources | "my solar edge" playlist on SolarEdge YouTube channel |
Frequently Asked Questions
Q: How do I configure my SolarEdge inverter's communication settings?
A: To configure your inverter's communication, tap "inverter communication" in the app, then scan the inverter QR code found on its sticker. If you connected to the inverter previously, you can tap "continue with last scan qr code." If scanning is not possible, you can manually type the connection details.
Q: What should I do if my Wi-Fi network name or password changes for my SolarEdge inverter?
A: You can reconfigure your inverter communication. If your inverter has an LCD screen, use its control buttons. Otherwise, tap "inverter communication" in the app, follow the steps to connect, select your desired wireless network, type its new password, and tap "join."
Q: How can I confirm that my SolarEdge inverter is successfully connected to the Wi-Fi network and monitoring server?
A: After connecting, tap "inverter communication" again, then move the inverter's red on/off p-switch to the 'P' position and release within two seconds. The system should confirm the connection was successful, indicating your inverter is connected to the SolarEdge monitoring server via your home Wi-Fi, allowing you to use the my solar edge app.